Ehh... Seems pretty sketch.


Sent from Motorcycle.com Free App

 

Just the fact that it advertises itself as a huge horsepower booster AND a "gas saver" at the same time screams snake oil to me....

 

Snake oil is good for your skin.. or so i hear.

Sent from Motorcycle.com Free App

 

100% positive feedback... But none of the feedback talk about performance. Just how fast they got it.

 

Indeed, Feedback on ebay will NEVER EVER have to do with the review of the product sold. Ebay feedback is ONLY for the outcome of the transaction. Feedback is based on communication, payment speed, and shipping speed. Feedback isn't meant to be a review.

To back up what I just said. Here's all my feedback as a seller.

 

why dont they put up some proper photos of what it is rather then just a generic picture of an IC chip.

i wouldn’t touch it, get something you know works & you can get support for like a power commander

 

Damn, look at how many people have purchased from this guy...

 

*facedesk*

 

lol at that dyno chart, 189bhp on the 300? lol

 

They use the same picture for all their auctions it seems.

Sent from Motorcycle.com Free App

 

its all in the head.. u no u got the chip so you think your going faster...

 

I'm asking them questions about it so far, and I got some straight forward answers.

Dear powertuning.2009,

Will you send me the instruction on my email? What's the difference with this and the power commander? and why is it so cheap?
Dear adamcruz08,

Yes,I will send you install instructions in few minutes
Power commander power commander is a fuel injection controller and this is performance chip and it is changing Intake air temperature signals and ignition angle.
We are selling this chip tuning box cheap because we have our own production so we can go that low
Cheers
Sanda


This is install info
1.Locate IAT (Intake Air Temperature sensor).It is usually on AIR cleaner box
,it is connected with 2 pin connector you will see iat sensor attached to air box on pictures.to get to iat sensor you will have to remove seat, panels
when you locate IAT,disconnect battery,ignition turn off
Remove IAT senor wire harness and plug 2 wires from chip into to holes of harness connector( instead of IAT sensor )
Once installed tie back or fasten the wires in a safe place (tape, silicone)
YOu will not use IAT sensor any more and it will stay in AIR box,
Chip will take control of IAT's functions as well
Reconnect the battery.
Start the engine and hold at 2700 rpm's for 1 (one) minute. This will allow
the computer to re-program your ECU.
After holding at 2700 rpm's, let the bike idle for at least 5 minutes
then turn bike off and restart before driving
3. Enjoy your ride

There's a pictures where it shows where to put it, but I have no idea how to post pic here at the forums (newbie here).

Any feedsbacks about it?

 

lets see some pics, if they are selling power commanders for $60 thats a steal

 

His 2 -ve comments says it all for me...

 

This whole thing is a scam from some Chinese or Asian seller and has his buddies inflate his rating. I wouldn't throw my enemy's money, let alone mine at this.

 

This product is a crock'a shit. Don't even entertain them. Hold idle at 2700. Smh.
You can't get double horsepower buy advancing the ignition. And sure as hell won't get better fuel economy if you do.
In fact this seller should be reported for false claims.

 

Not falling for it

 

remember, you get what you pay for, buy something decent that actually works and is well established like a Power Commander 5, have a talk to our Vendor Hard Racing, im sure they will look after you

http://www.hardracing.com/13-14 Bikes/13 EX300.htm

 

look at the date 2004 no ninja 300 back then snake oil BS.

 

.

LMAO. Good catch.

Doesn't even tell you what bike that Dyno Run was on ?

If they are going to Advert. 25HP for a EX300, they should have a Dyno graph for a EX300.

Not some unknown bike from back in 2004.



.

 

I need one
LOL
Yea
Sure
As always to good to be true.
Sounds like a set of steak knives as well
And wait there is more!!

Sars

 

ehh, the more someone or an advert tries to convince me about how 'good' it is the more inclined I am to say no

"REAL CHIP IS INSIDE BOX"
"THIS IS THE UNIQUE CHIP"
"MAKE YOUR MOTORCYCLE MORE POWERFUL AND FASTER!!!!"

lets not even get started on the dynochart haha

 

Why are we even still discussing this?

 

In hopes Someone will be stupid enough to buy it so we can laugh at them.

 

can't believe they still sell these IAT "chips".. they've been selling this garbage on the net for at least 10 years, they don't do anything. the ones they use to sell for one of my old cars was nothing more than a resistor that connects the two plugs on the IAT sensor and messes up the reading. does absolutely nothing.