[cbzdel]

I have people asking for pics of several of my mods, so I wanted to post a couple pictures of, now that the weather is finally decent for a day or two..

1) PlastiDip windshield - Looks awesome, still just as glossy as could be, check out the reflection of my garage in the pic, its all smudgy just because it needs to be cleaned, otherwise its flawless and totally reversible if I choose to peal off the plastidip..
2) Yoshimura Bar Ends
3) China made adjustable levers, for the 250R, fit is ok...
4) SSR Race Gas Cap, I bought this just because it was black
5) SSR Black Stem Nut

I would say I spend about $150 for all of this..

I am still debating clip ons, I want to keep my comfort but I would like to get them just to show off a pair of fork pre-load adjusters

 

[icon1k]

Hey when you plasti dipped your windscreen can you tell me how many coats you used etc
i just bought my plasti dip i couldnt find the gloss so i bought a different gloss but i am
not sure how many coats and if i spray the inside or outside
thankyou!

 

[cbzdel]

I put almost half the can on the inside of it.. the problem was I could not get correct coverage in the ridges so I just kept adding more and more..

Mine is not a gloss, its just a regular black plastic dip.. Its like a satin black.. If you paint the inside face with flat black it would still look gloss because the windshield is a reflective plastic..

 

[TaxHater]

Looks good mate!

I really want some Yoshimura Bar Ends. Where did you get yours?

 

[cbzdel]

Got them off ebay, cheapest place I could find them.. I have learned that on ebay, sometimes it helps to search for the manufactures part number rather than the part name.. I was able to get them a couple dollars cheap this way..

 

[cfrp]

Lookin good man! All for $150 too.

 

[cbzdel]

Also have some other mods not shown in these pics, so its not the only stuff I got going on lol

Next on the list is my Yoshimura rearset adjusters which I get tomorrow.. SS brake lines.. Projector Retrofit.. And then maybe an exhaust when I find one that I cant live without.. Oh I also want to do the rear seat/peg delete when I pick up my new exhaust..

Possibly also get a set of the Yoshimura frame sliders.. I think they are the best set of "CUT" sliders I have ever seen

Clip ons and full on racing rear sets are still questionable.. As is the slip on vs full system..

 

[unrest]

Nice mate!
Tinted shield looks awesome on white!

 

[JxStarLA]

Looking good! how does that SSR gas cap feel once installed? loose or good fit?

 

[cbzdel]

Is a very solid fit, i am really happy with it

 

[ricochet08]

that looks effin great

 

[cfrp]

Can't wait till you do the headlight retrofits. What projectors and HID kit are you looking at gettin?

 

[ghost3772]

Looks awesome man!

 

[cbzdel]

Probably the trs matchbox, trs just had such a following you know you're getting a quality product.

 

[icon1k]

first

Also have some other mods not shown in these pics, so its not the only stuff I got going on lol

Next on the list is my Yoshimura rearset adjusters which I get tomorrow.. SS brake lines.. Projector Retrofit.. And then maybe an exhaust when I find one that I cant live without.. Oh I also want to do the rear seat/peg delete when I pick up my new exhaust..

Possibly also get a set of the Yoshimura frame sliders.. I think they are the best set of "CUT" sliders I have ever seen

Clip ons and full on racing rear sets are still questionable.. As is the slip on vs full system..

ok first question what yoshi frame sliders
next which rearsets did u decide on
next projector replacement?

dumb question is there aftermarket shock available yet. I have my suspension on 5 as im 250 pounds (down 10 woot) but id love some shock adjustments

 

[cbzdel]

first

ok first question what yoshi frame sliders
next which rearsets did u decide on
next projector replacement?

dumb question is there aftermarket shock available yet. I have my suspension on 5 as im 250 pounds (down 10 woot) but id love some shock adjustments

The Yoshimura frame sliders are not out yet, there are pics floating around somewhere on the fourm, they are actually cut sliders, but I think they look really good.. I am willing to drill my fairings for the first time ever..

I have Yoshimura rear set adjusters which come in the mail today, it is just a bracket to relocate the rear set backwards and up a little.. Depending on how I like it I may in the future get a set a fully adjustable rear sets..

For projectors as said above, the TRS Matchbox, once I get the final dimensions.

All Ninja 250R shocks should fit the 300.. There is also other options that you can mod to fit the 250R/300 google can help you out with that..

 

[icon1k]

Hey when you plasti dipped your windscreen can you tell me how many coats you used etc
i just bought my plasti dip i couldnt find the gloss so i bought a different gloss but i am
not sure how many coats and if i spray the inside or outside
thankyou!

OMG the **** plasti dip is driving me crazy
I have put on 8 coats so far and all is perfect EXCEPT the one ridge
line on the left side
it looks awesome and as they say close enough for government work
but this is my masterpiece and i cant leave it like this
lol ok 30 more minutes till another coat
come on big money no wammies!

 

[cbzdel]

I dont understand why the plastidip doesnt stick good to the ridges its very strange..

 

[Patto'sNinja]

Is the plastidip the black one? Or isthere another can of gloss black?

 

[Marioalex24]

Looks good.