Kawasaki Ninja 300 Forums banner

GSXR 4 piston Tokico brake caliper

16078 Views 39 Replies 9 Participants Last post by  old3
It is on! Works better than the stocker with HH pads already, and it is 17f for my ride home with them. They can only get better as the tires can heat up. Feel is way up, it is a true 2 finger brake now.

My biggest complaint with the stock cal was how it lacked feel, especially as the longer stops got towards the end, they would go numb. This just bites right to the end, and modulation thru the lever is super controlled. As it warms up I might be tempted to try a master with a mm or two bigger piston but it will be a matter of fine tuning, it is right at the goal line now.

My buddy is a master machinist, and it took us, (really him, :D) most of 7 hours to design, fab and fit the bracket. Now that we have a prototype, I asked if he would want to sell them. He suggested that steel brackets would be easier to build and that might keep it affordable.

If there is interest I'll see if he is willing to build a few more. It was done as a favor to me, he usually is building factory parts or stuff for aircraft.

You have to click for the pic for some reason?

See less See more
  • Like
Reactions: 1
1 - 1 of 40 Posts
I'll be waiting to see more pics :)
Interested to see what you do with the bracket. Could prob use some paint...
1 - 1 of 40 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.