Kawasaki Ninja 300 Forums banner

diy

  1. Gearing Help!!

    Ninja 300 General Discussion
    I'm doing a track day in 3 weeks and I need to replace my chain and sprockets. Should I stick with stock gearing for my first track day or should I try gearing it down some? (Up in front down in the back)
  2. Replace Cylinder Head Cover?

    Ninja 300 Service and Maintenance
    TL;DR: Bought a 2013 Ninja 300 and found a puncture in the cylinder head cover. Looking for advice/instructions (Tools/Parts/Processes) on replacement of the cylinder head cover or any other options. I am a new rider and I picked up a 2013 Ninja 300 with 4,900 for what I thought was a great...
  3. ABS light after tyre change.

    Ninja 300 Issues and Troubleshooting
    My orange abs light has been on for about 4 months and it went on just after a tyre change by a shop near me. its on always, when the bike is on of course but i mean from the moment the bike is on the light is also, no matter the speed. My back wheel has locked up 2-3 times during this time...
  4. DIY Fender Eliminator 3D Printing 2013+

    Ninja 300 Appearance & Modifications
    Hi All, I wanted to share with everyone a 3D printable fender eliminator for the 2013+ Ninja 300. I was tired of all the over priced fender eliminators and wanted to have a go at making it myself, only using the stock components and keeping it as small as possible. Files and instructions are...
  5. DIY - Steering Stem Bolt Smartphone Mount

    Ninja 300 General Discussion
    I finally got around to making a proper DIY on how to tap the steering stem bolt to install a Ram Mount Ball for a smartphone holder for the Ninja 300. The topic comes up every so often here on where to buy them (you can't) so here's a guide for the interwebs to refer to. To anyone familiar with...
  6. DIY - Sportbike Smartphone Ram Mount - 2017 Kawasaki Ninja 650 ABS

    Ninja 300 Appearance & Modifications
    Here's another DIY I just posted: Instructables.com - Sportbike Smartphone Ram Mount - 2017 Kawasaki Ninja 650 ABS I've linked above since that site offers better features for posting DIY's, but there it is in case anyone is interested. It's just a DIY on how to thread the handlebar to accept...
  7. Easy Rear Lowering Kit DIY

    Ninja 300 Appearance & Modifications
    So I was looking at lowering kits online, and, while $30 shipped for some adjustable rear dogbone links is quite appealing and more than reasonably priced, I would rather spend $10 for materials and make my own right now instead of wait up to 7 days for the others to arrive. Here is the...
  8. $10 Fender Eliminator

    Ninja 300 Appearance & Modifications
    So today I was looking at the ridiculous fender we have on the back of the ninja 300 and decided it needed to go. But I couldn't bring myself to pay $100 or more for one just yet, so I decided to make one myself! I got the idea from this guy http://m.imgur.com/a/F2Vvj but did mine a little...
  9. Rear stand is too wide

    Ninja 300 Parts & Accessories
    Hey guys, I've searched for existing threads about the size of rear stands / spools, but did not find anything beyond what brand to buy, etc. I bought a Speedmetal rear stand from Cyclegear, which requires that I have swingarm spools, and has a minimum width of 13.5". The sales rep told me...
  10. How-to DIY: Red Light

    Kawasaki Ninja 300 Videos
    How-to Guide / DIY on Red Lights... by yours truly. :D:D
  11. Ninja 300' M4 CF Exhaust Install

    Ninja 300 Service and Maintenance
    Hey guys, just got finished installing my new M4 CF Exhaust slip-on and made a short video of the install, and just a very quick comparison at the end. Posted this in my build log too but figured I'd toss it up in the videos section too, as some might not see it! (Hopefully this isn't against...
  12. Oil filter Strap wrench

    Ninja 300 Service and Maintenance
    this video is where i got the inspiration to make my own i have been hunting for some steel tube for ages and i eventually gave up and used to round steel tube instead and flattened one end a bit with a decent sized hammer i couldn’t find any seat belt webbing or any old wrecked cars to get...
  13. HOW-TO: FREE Weighted Bar Ends for Clip-Ons

    Ninja 300 Appearance & Modifications
    The stock bar ends are weighted to reduce vibration and fatigue so why not use them on your brand new clip-ons that came with plastic caps?? Here's what you'll need: 2x OEM bar ends 2x 2.5" countersunk head bolts 2x nuts to match the bolt 1x lawnmower fuel line (home depot carries this) 1. Cut...
  14. DIY: Brake Pad Upgrade/Replacement

    Ninja 300 Appearance & Modifications
    I snagged a very good deal on a pair of EBC FA197HH pads (great reviews!) on eBay so here's a HOWTO on replacing your Ninja 300 brake pads: 1. Gather your tools. You're going to need a 12mm socket, 5mm Allen/hex key, Threadlock (blue) and torque wrench. 2. Loosen the pad pins (pink) and...
  15. Kawasaki 300 Ninja Do-It-Yourself & How-To Thread

    Ninja 300 Service and Maintenance
    Welcome to the Kawasaki 300 Ninja Do-It-Yourself & How-To Thread The Goal is to make new threads and link to them. If you see anything in this FAQ that needs it's OWN (or already has) thread please let me know OR create one and PM me the link. Please be careful to NOT create a new thread if it...
Top