Kawasaki Ninja 300 Forum - View Single Post - Drive train lash anyone?
View Single Post
post #3 of (permalink) Old 10-02-2019, 05:28 PM
jkv45
Veteran
 
Join Date: Jul 2018
Posts: 289
Thanks: 7
Thanked 13 Times in 13 Posts
Even if the rubber dampers are good in the cush drive, there will most likely still be a lot of slop.

With the rear wheel off the ground and the engine in gear, see if you can spin the wheel back and forth without moving the chain/sprocket.

We've shimmed numerous cycles, but our Kawis have been the worst -

https://faq.ninja250.org/wiki/How_to...the_cush_drive

I like to use ABS plastic for shims, cut in rectangles to fit snugly between the rubber damper and the wheel.
jkv45 is online now  
The Following User Says Thank You to jkv45 For This Useful Post:
iahawk (10-02-2019)
 
 
For the best viewing experience please update your browser to Google Chrome